Pyro 1394 Drive Enclosure Kit - Accessories, Drive Accessories
Add Multi-Gig Storage To Your PC or MAC Instantly Enhance almost any IDE Hard Drive, ATA-100 Drive, DVD, or CD Drive Oxford 911 chip Simple Plug and Play Installation Hot Plug and Play Storage Transfer Rates Up To 400 Mb/sec Link up to 63 Storage Devices To Your Computer Stackable Daisy Chain-able with no addressing or terminators to set up. Supports Windows 98 SE, Windows Me, Windows 2000 or MAC SAVE MONEY Get SCSI Speed without the hassles and SAVE Money Too PYRO Native Bridge Board: The secret ingredient that converts your IDE or CD drive into a FireWire Drive is the PYRO Native Bridge board. This board comes pre-installed in your PYRO Drive Kit. The PYRO Native Bridge board is 1394a compliant and supports 1394 bus speeds of 100, 200 and 400 Mega bits per second. What you really want is SPEED: The PYRO Drive kit will help you maximize the data throughput of your drive. Data Burst speeds of up to 400 Mbps (50MB/sec) are supported by the 1394 technology. Sustained transfer rates of over 16MB/sec. have been achieved with hard drives in our testing labs. Digital Video only requires 3.9 MB/sec. so you have lots of SPEED left over for other tasks. External Stackable Storage: With the PYRO 1394 Drive kit it's never been easier to add storage to your computer or network server. Just install your drive and connect. There are no terminators or device ID's to worry about, FireWire does all of that for you automatically. The guys in our lab say that you are not really cool unless you have at least three (3) PYRO drive kits stacked. Hot Swappable: Want to add a drive to your computer just plug it in. No re-booting required. Want to remove a drive, just let your operating system know that you are removing a drive and unplug. This is so easyyou're going to fall in love with your computer all over again. Plug and Play: No bravery required. Adding a hard drive to a computer used to be one of the more scary things in life. But not with the PYRO Drive kit. To install a new drive all you do is slide your drive into the enclosure, bolt it down to the enclosure with the included mounting screws, plug in the power, close the case and connect it to your 1394 card. It can't get much easier than this. If you are good with Lego's or Lincoln logs, you'll be an expert at this. Ball Bearing Fan: The Drive Kit enclosure includes a silent ball bearing fan to keep your drive cool and running smooth and quiet for thousands of hours. The fan includes metal fan guards on the inside and outside of the enclosure so you can't hurt your pinkies, even if you tried. But don't go stick'n your fingers where they don't belong! Note: Kit does not include any type of drive.
50173075 - ADS Technologies - API-800X